In Design and technology we are making our own torches. Today we are making our circuit. First we had to get the things we needed like cork, paper clips, split pins, bulbs and batteries. When we had our things, we went to the table and started by putting the paper clip under the split pins and poked it in the cork. Then we got a wire and clipped it on the split of the pin. Next we poked another split pin in the cork. Then we connected the wire to the battery holder and another wire coming from the other battery place and connected it to the bulb holder. We got another wire and attached it from the circuit to the bulb holder. After a while the bulb lit and I knew that meant success.
Tags: Ayaan, class13, My torch circuit
Leave a Reply